manualshive.com logo in svg

OHAUS Adventurer Pro Grain, Инструкция по эксплуатации

Поделиться
Скачать
OHAUS Adventurer Pro Grain Скачать руководство пользователя страница 37

           EN-35

Adventurer Pro Grain Test Scale

             

 LIMITED WARRANTY

Ohaus products are warranted against defects in materials and workmanship from the date of
delivery through the duration of the warranty period. During the warranty period Ohaus will
repair, or, at its option, replace any component(s) that proves to be defective at no charge,
provided that the product is returned, freight prepaid, to Ohaus.

This warranty does not apply if the product has been damaged by accident or misuse, exposed
to radioactive or corrosive materials, has foreign material penetrating to the inside of the
product, or as a result of service or modification by other than Ohaus. In lieu of a properly
returned warranty registration card, the warranty period shall begin on the date of shipment to
the authorized dealer. No other express or implied warranty is given by Ohaus Corporation.
Ohaus Corporation shall not be liable for any consequential damages.

As warranty legislation differs from state to state and country to country, please contact Ohaus
or your local Ohaus dealer for further details.

8 page 31 to 35.pmd

7/27/2006, 3:11 PM

35

Содержание Adventurer Pro Grain







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды