OHAUS Adventurer Pro Grain, Инструкция по эксплуатации

Страница: 15 / 38

Adventurer Pro Grain Test Scale
EN-13
Weigh
Press the
UNIT button repeatedly (short presses) until the
display shows 0.00g.
Press
ON O/T button to zero the balance.
Place objects to be weighed on the pan to display the weight.
The example displays a 200 gram weight.
3.6 Application Modes
The Adventurer Pro Grain Test Scale incorporates Weighing, Test Weight and Dockage application
modes. The default setting has the Weighing mode turned on, Test Weight to lb/bu (qt) and
Dockage set to positive.
3.6.1 Weighing
Use this mode to determine the weight of items in the selected unit of measure. The Adventurer
Pro Grain Test Scale is shipped with grams enabled. Before using other units of measure,
these units must be turned on in the Unit menu ( See Section 3.7.6 ). Grams is the default
setting.
3.6.2 Test Weight Mode
The Test Weight Mode allows the measurement of the density of a sample using one of four
standard container sizes. Test Weight values can be displayed as follows:
lb/bu (qt) = pounds per bushel based on a quart container.
lb/bu (pt) = pounds per bushel based on a pint container.
kg/hL (L) = kilograms per hectaliter based on a liter container.
kg/hL (.SL) = kilograms per hectaliter based on a half liter container.
Before starting, enable the desired test weight mode in the Mode Menu (See Section 3.7.5).
Press the TEST WEI GHT button. The scale enters the Test
Weight mode. the selected test weight unit is indicated on
the second line of the display.
Place the empty container on the scale pan and press the
ON O/T button to tare the container.
Remove the container from the scale and fill it with the test
sample.
Place the container with sample on the pan. The primary
display shows the actual test weight (density) with the unit
shown on the secondary display.
To clear scale entry, press the ON O/T button.
5 page 9 to 15.pmd 7/27/2006, 3:11 PM 13