manualshive.com logo in svg

OHAUS Adventurer Pro Grain, Инструкция по эксплуатации

Поделиться
Скачать
OHAUS Adventurer Pro Grain Скачать руководство пользователя страница 26

 Adventurer Pro Grain Test Scale

EN-24

Reset
Set On to lock the Reset Menu.

Lock Set
Set On to lock all submenu lock settings.  When
set Off, the lock settings for all menus are
accessible.  To turn Lock Set off, refer to section

End Lockout
Press the 

Yes

 button to advance to the End

menu. Press the 

 

No

 button to return to the Cal

menu.

3.7.13 End

The End menu is used to exit the menus and
return to previous application

3.8 Legal for Trade  (LFT)

The Adventurer Pro Grain Test Scale complies
with NTEP regulations and is suitable for
commercial and GIPSA grain testing
applications.

3.8.1 Setting the Scale

• The Calibrate Sub-menu is hidden and

not available.

• In the Setup Sub-menu, the Legal Trade

menu item is locked.

• In the Setup Sub-menu, the Auto Zero

(AZSM) menu item is set to 0.5d and
locked.

• In the Readout Sub-menu, the Gross

Indicator menu item setting is locked.

• The Mode Sub-menu is locked.
• In the Unit Sub-menu, the Custom Unit

menu item is hidden and not available.

• In the Print Sub-menu, the Output When

Stable menu item is set to ON and locked.

• In the Print Sub-menu, the Continuous

setting in the Auto Print menu item is
hidden and not available.

• In the Reset Sub-menu, the Reset Readout,

Reset Mode, Reset Unit and Reset Global
menu items are locked.

• In the Lockout Sub-menu, the Calibration

menu item is locked.

To regain access to the locked Menu settings,
turn the scale off.  Turn the scale on and press
the Lock Switch while OHAUS is displayed
during power up.

Press and hold the Menu-Cal button until MENU
is displayed.  Move to the Setup Sub-menu
using the 

No

 button. When SETUP is

displayed, press the 

Yes

 button to enter the

Setup Sub-menu. When LEGAL TRADE is
displayed, press the 

Yes

 button to view the

setting OFF. Press the 

Yes

 button to change

the setting to Comm or GIPSA. Press the 

Exit

button to store the setting and return to the
current weighing mode.

Note

: Before setting the scale, enter the Menu

to perform a calibration and make any desired
balance setting adjustments. Once the scale
is set, the following conditions apply:

3.8.2 Sealing the Scale

To seal the scale, cover the Lock Switch
access hole by installing the Security Cover
and sliding it to the right.  Then install a wire
through the holes in the tabs of the Security
cover and Top Housing.

Wire Seal

Security Cover

7 page 19 to 30.pmd

7/27/2006, 3:11 PM

24

Содержание Adventurer Pro Grain







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды