OHAUS Adventurer Pro Grain, Инструкция по эксплуатации

Страница: 35 / 38

EN-33
Adventurer Pro Grain Test Scale
5.4 Communication
The scale is equipped with an RS232 interface (COM1). Some models are also equipped with
a second RS232 interface (COM2). Connecting the scale to a computer enables you to operate
the scale from the computer, as well as receive data such as displayed weight.
5.4.1 Commands
Commands listed in the following table will be acknowledged by the scale. The scale will
return “ES” for invalid commands.
Command Function
IP Immediate Print of displayed weight (stable or unstable).
P Print displayed weight (stable or unstable).
CP Continuous Print. 0P ends Continous Print.
SP Print displayed stable weight.
SLP Auto Print stable non-zero displayed weight.
SLZP Auto Print stable non-zero weight and stable zero reading.
xP Interval Print x = Print Interval (1-3600 seconds) 0P ends Interval Print.
H Enter Print Header Lines
Z Same as pressing Zero Key
T Same as pressing Tare Key.
PM Print current mode (weighing mode).
M Scroll to the next enabled mode.
PU Print current weighing unit.
U Scroll to the next enabled unit.
OFF Turns scale OFF.
ON Turns scale on.
PSN Print Serial Number.
PV Print Version: name, software revision and LFT ON (if LFT is set ON).
PTIME Print current time.
PDATE Print current date.
8 page 31 to 35.pmd 7/27/2006, 3:11 PM 33