OHAUS 7000 Series, Инструкция по эксплуатации, Страница: 85 / 134

7000 SERIES INDICATORS EN 79

If the ID is not known, the record can be found by viewing the ID Table.

If the ID is known, it can be entered in a Quick Recall sequence.
Recall from ID Table
To recall a record from the ID Table:
1. Press the MENU key to access the Operator Menu.
2. Select ID Table and press ENTER .
3.
The first ID record will be displayed, with a scroll bar to the right.
4. Use the UP and DOWN navigation keys to move the view until the desired record is displayed:
a) Press ENTER to select the record and return to the counting application
b) Press the LEFT arrow to return to the counting application without selecting a record.
Quick ID Recall
When the display is in piece-counting mode, a known ID can be recalled directly:
1.
Use the numeric keypad to enter the ID.A Data: label will display on line 1 of the display, and the entered
number on line 2.
2. Once the ID has been entered, press ID to perform the recall.
3. If the ID is not found in the ID Table, an error message will appear.Clear the message by pressing ENTER
.The display will return to the counting mode, using the previous APW value.
4.4.5 Print Formats
When a demand print is triggered in the Counting application, the terminal will look for a demand connection to one
of the ports using template 9.
If such a connection exists, then template 9 will be sent out via the selected port.
If there is no demand connection using template 9, a “No demand connection” error will be displayed.
New Print Fields
Template 9 contains four new data fields related to the Counting application that are not available in the other
templates.
These new print fields are:

APW

Piece Count

Record ID (from ID Table)

Record Description (from ID Table)
Default Template
The default structure for template 9 is shown in
Figure 4-14.
Elements in braces {…} are fields of data supplied by the terminal.
Figure 4-15 shows a printed sample of the default template.