OHAUS 7000 Series, Инструкция по эксплуатации, Страница: 82 / 134

EN 76 7000 SERIES INDICATORS
Key Function
Opens ID NEW screen, where a new ID can be set up.
( CLEAR )
Prompts Delete record? Press ENTER to confirm and
delete the displayed record, LEFT arrow to display a
message, Delete all records? Press ENTER to confirm
and delete all records, LEFT arrow to return to the
view without deleting.
UP and DOWN arrow
keys Move the view to the next or previous ID.
( ENTER /PRINT)
Opens the displayed record for editing.
LEFT arrow key Exits the ID Table view.
ID NEW Screen
The following fields are available when setting up a new ID. Each value is updated when the
ENTER key is used to
move to the next entry box.
Parameter Function
ID Initially displays the next available ID, from 01 to 99. This value
can be edited.
If the entered value is not unique, an error message displays
–
ID already exists. Press ENTER to clear the error; the first
available ID is displayed in the entry field.
Note: To exit the screen without creating a new ID, enter 00 in
this field and press
ENTER .
Description Alphanumeric description associated with this ID.
APW Average part weight, in the
scale’s primary weight units.
Tare
Tare value, in the scale’s primary weight units. This value can
be 0.00.
n Number of times a count has been added to the totalization
register for this ID.
Tot The total number of pieces accumulated using this ID.
The following keys can be used when creating a new ID record:
LEFT arrow Return to ID Table view.
UP and
DOWN arrows Navigates between the labels on the setup page.
ENTER Confirm entry and move to next parameter.
4.4.4 Operating Sequences
The following sections describe operation of the counting application.
Tare
– Sample Sequence
Begin with the scale empty and the terminal in the Counting application.
1.
The display will prompt Tare? Press ENTER .
2. Press ZERO to capture an accurate zero reference.
3. Place the empty container for the parts to be counted on the scale and press the ENTER key . If no
container will be used, simply press ENTER with nothing on the scale.
4. The weight of the container will be subtracted and the display will indicate a zero net weight. The display will
prompt Sample? Press
ENTER . with a Sample = xx entry box below.
5. Add the desired number of sample pieces to the scale.