Oh!FX SIR-FOAM/M, Руководство по установке

Страница: 5 / 20

INSTRUCTION MANUAL
5
Placement: place the machine on a stable and fl at surface with enough height and space
around so that the fabric of the Sky dancer can raise without touching anything around.
Loosen the locking knobs and point the turbine vertically as shown in image. Now tighten
the
locking knobs.
1- Fixing the Sky dancer or sleeve on the Sirocco. Place the mouth of the Skydancer
around the Skydancer head, using the
Car luggage strap
2- Operating: Once plugged the Sirocco machine in a socket, turn ON the
manual switch
and check regularly the fi rst moments that everything works properly and that the Sky dancer
doesn’t catch any object in the air.
ASSEMBLY AND OPERATION
• FX heads have been designed for the purpose described in each one. Any other use,
diff erent from the written, excludes CONFETTISHOTS,SL of liability and warranty.
• Never switch ON the engine without any FX head duly fi xed with the screws.
• Use only the consumables intended for that specifi c use, and duly certifi ed.
• Bear in mind that the motor can get wet but not immerse (protection IP 65). Even so, it is
recommended that the power supply is out of reach of water.
• In case of malfunction, do not attempt to disassemble the machine and contact the
distributor or manufacturer. Any manipulation may exclude the warranty.
GENERAL CAUTION FOR SIROCCO MACHINE