background image

INSTRUCTION MANUAL

9

PUMPING WATER

1- 

Fill your tank with water.

2- 

Submerge the pump into the tank. It should be in horizontal position so that the pump 

is always well refrigerated. The pump cannot run out of water. (Risk of burning). In a similar 

way, the pump does not stop alone; In case of closing the water inlet tap of the machine, you 

must turn off  the pump by its outside switch provided.

 

3- 

Connect the hose coming from the pump, to the 

inlet water tap

 of the machine. Cover 

the 

PREMIX connection

  with the provided 

stopper caps

.

4- 

Now  you  can  proceed  with  point  2  of  ASSEMBLY  AND  OPERATION  previously 

described. During the use of the machine, you may wish to let a water hose fi lling the tank 

(specially if your tank is not too big). In this way, in the meantime the machine is consuming 

water, you get more water inside the tank and thus it takes longer to empty the tank.

PUMPING PREMIX

Working with PREMIX means having the foam fl uid already diluted and mixed in a tank from 

which the mixture is directly pumped to the foam cannon. 

1- 

Fill your tank with water, and add the foam FLUID at the rate indicated on the bottle 

of your foam fl uid. Our foam fl uids are Concentrate and the suggested dose is at 1,8 to 2%. 

When working with PREMIX, it is then not necessary to use the 

absorption tube for foam 

fl uid

 provided.

2- 

Connect the hose coming from the pump output, to the 

PREMIX connection

 on the 

machine. Cover the 

WATER

 and 

FOAM fl uid connections

  with the provided 

stopper caps

and proceed with steps 4, 5 and 6 previously described

•  Only and adult and qualifi ed person should operate the machine.

•  Keep in mind that the engine can be wet but not submerge, even so, it is recommended 

that the power cable stays away from the area.

•  Always use specifi c foam fl uids for foam parties, as the ones OhFX has developed:

•  FFDC: High concentrate foam fl uid. Disappears after 20 minutes.   

(Recommended for outdoor foam parties)

•  FFP:  High  concentrate  foam  fl uid  long  duration.  Stays  about  1  hour  on  the  fl oor.

(Recommended for Indoor foam parties)

CAUTION

Содержание SIR-FOAM/M





















Отзывы: