Ogden RCR812, Руководство пользователя

Страница: 5 / 52

Hay Runner™ Hay Rake 3 Ogden Metalworks, Inc. — 217-582-2552
1.4 Specifications
DESCRIPTION RCR 8 RCR 10 RCR 12
Raking Width*
Minimum Maximum Minimum Maximum Minimum Maximum
17’ 22’ 6” 19’ 22’ 6” 21’ 26’ 6”
Number of Wheels 8 10 12
Weight in Pounds 1960 2135 2300
Minimum Maximum
Transport Width** 8’ 10’ 6”
Transport Length** 17’ 21’
Transport Height** 9’ 11’
Windrow Width** 3’ 6’
Wheel Hubs & Bearings Greasable Tapered Roller Bearings
Wheel Diameter 55” & 60”
Tine Diameter 7 mm & 7.5 mm
Number Of Tines Per Wheel 40
Rake Wheel Suspension Independent Arm For Each Wheel – Teflon Bushings
Ground Pressure Adjustment At Pivot
Hydraulic Cylinders Patented Adjustable Torsion Spring On Each Wheel
Hydraulic Pressure 3” x 12” Double Acting
Requirement Minimum 1900 PSI
Hydraulic Remote Ports Required One Set
Tires 205/75-15”
Hydraulic Center Wheel Kit Optional
Walking Tandem Axles Optional
Wind Guards Optional
* Will vary depending on crop conditions ** Dimensions vary per model
1.5 Intended Usage
Do not use this wheel rake for any other purpose than
its intended use of raking hay and other forage crops.
If the wheel rake is used or altered in any way
from the original design, the manufacturer does
not accept any liability for injury or warranty.
1.6 Operator Orientation
The directions left, right, front, and rear, as
mentioned throughout this manual, are as seen from
the tractor operator’s seat and facing in the direction
of travel.
1.7 Product Improvements
Because Ogden Metalworks maintains an ongoing
program of product improvement, we reserve the
right to make improvements in design or changes
in specifications without incurring any obligation to
install them on units previously sold.
1.8 Disposal of Equipment at End of Useful
Life
The Ogden Metalworks family of wheel rakes have
been designed for the specific purpose of raking hay
and other forage crops. When this unit is no longer
capable of doing its designed purpose, it should be
dismantled and scrapped. Do not use any materials
or components from this unit for any other purpose.