The slurry cup should contain enough cement slurry that it leaks out of
the hole in the center of the cap. If it is not, remove the cap and refill
the slurry cup. Do not add cement through the hole in the cap.
8. Screw the pivot bearing into the hole in the center of the cap and tighten.
9. Wipe the entire slurry cup clean to ensure that no cement remains on
the outside.
OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
19
Slurry Cup Tool
Slurry Cup Stand
Slurry Cup
Pivot Bearing
Note