To transfer the test data to a PC:
1. If the Eurotherm software has not already been installed on the comput-
er, install it from the disk provided with the Consistometer.
2. Remove the disk from the chart recorder and insert it into the appropri-
ate drive on the PC.
3. From the Start Menu, select “Programs” then “Eurotherm” and then click
“Review”. This will open the Eurotherm Review software application.
4. From the “File” menu, select “Transfer” and then click “Files”.
5. Click the “Browse” button, then choose the appropriate drive for your
removable media. Open the “History” folder and select the files you
wish to transfer.
6. Type a name in the “Name” field and click “OK”.
At this point you will receive a warning message. Click “OK” again.
7. When the file transfer is complete, go to the “File” menu and click “New
Chart”.
8. Click “Add Point”.
OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
12
