OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
20
Assembly
Installing the Test Cell
1.
Carefully place the cell into the heating jacket. Make sure the valve stem
protrudes through the hole in the bottom and that the fixtures on the side
of the cell slide into the notch on the side of the heating jacket.
2. Plug the sample thermocouple and pressure transducer into the
appropriate ports on the unit cabinet to the left of the heating jacket.
Relief Valve
Sample
Thermocouple
Pressure
Transducer
3.
Connect the hydrostatic pressure inlet to the “Hydrostatic Pressure” port
on the unit cabinet via a quick-connect hose.
LVDT
Nitrogen/
Gas Pressure
Valve
Piston Rod
Heating Jacket
Hydrostatic
Pressure Inlet
Test Cell
