OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
23
Software
Options
To access the Options screen, choose “Options” from the “Edit” menu.
“Enable Bath Level Control”
- If this box is checked, the “Raise
Bath” button on the “Main Screen” will be visible and active.
“RPM DAQ Settings”
- “RPM High”, “RPM Med” and “RPM Low”, “Dead
Time”, “DAQ Time”. These fields are used to determine the amount of time
needed for the sample to stabilize at a given rate. The fields are also used
to determine the amount of time data is averaged before being saved. For
example, if RPM High is set to 60, Dead Time is set to 15 and DAQ Time is
set to 20, any rate of 60 RPM or greater during a sweep would stabilize for 15
seconds then begin averaging data for 20 seconds before saving the data.
“Reverse Rates Gel UI”
- If “Hysteresis” is selected on the “Test
Builder” screen (see page 25), this option will perform a gel test after the
forward portion of the sweep and after the backward portion.
“Data Archive Directory”
- Specify the directory to store archived data.
“Logo Files”
- Specify a logo file (.jpg format) to display on the graph at the
end of the test.
“Time Format”
- Choose a time format for all of the ORCADA
®
software.