Officine Gullo CVCS4G, Инструкция по установке и эксплуатации

Страница: 17 / 24

17
Officine Gullo
TURNING OFF THE APPLIANCE
Push and turn the knob into position “0”. This command blocks the gas supply to both the
main burner and the pilot burner. To relight the appliance, it is necessary to turn the knob
again into position and press the button.
EMPTYNG THE TUB MOD. CVS...
The user should be equipped with a suitable container for the
drained water. Insert the outlet pipe as shown on the drawing
and place the container in position. Push the safety device (A)
upwards and move lever (B) to the symbol
.
Important: pay attention to the clearance between the appliance
and the edges of the stands.
EMPTYNG THE TUB CVCS....
To carry out this operation, it is necessary to open the outlet tap (lever in vertical position) which
can only be reached through the cabinet door situated below the appliance.
SAFETY THERMOSTAT MOD.CVS…
The appliance is provided with a safety thermostat which interrupts the gas flow if the temperature
goes above the maximum set value. When the safety device intervenes, both the main burner and
pilot burner go out.
If this happens, it is possible to restart by pressing down fully the red thermostat button after
having removed the control panel. If the problem occurs again, call in the after sales assistance.
ANOMALIES
If the probe does not detect the presence of water in the tank for more than 15 sec. the system
disables the heating element: the alarm is indicated by a flashing red light.
When the probe returns to detect the presence of water, the heating element is activated and the
red light is turned off.
NOTE: the filling phase is monitored by the system through the TIME-OUT.
OBSERVATIONS AND ADVICE
Always keep the water level checked.
ATTENTION! Do not start up the appliance without water.
Use the appliance only under surveillance.