manualshive.com logo in svg

OETIKER ELK 02 Series, Инструкция по эксплуатации

Поделиться
Скачать
OETIKER ELK 02 Series Скачать руководство пользователя страница 94

OETIKER ELK 02 V2.X

9 

Menu navigation in the ELK 02

Issue 05.2021

08903352

9-94

9.4.3  Pincer type

HO XX-XX-PG 192 /168 T1

Function 

Force priority closure with pincer type PG 192 / 168T1 
closes Low Profile Clamps, e.g. PG 192 / PG 168T1, 
for which the closing movement has to be stopped 
immediately after the retaining hook engages.
Then the system checks that the Low Profile Clamp has 
been closed correctly.

Close pincer jaws from the OPEN position (OF)

The pincer jaws must be in the OPEN position (OF) in 
order for a closure to be initiated.
When a “START” is initiated (depending on the Start 
definition: see “START system settings”, p. 8-52)) via the 
Start button or the external X2/X20 interface, the pincer 
jaws close with the closing time between the opening 
gap and the closing force (OF-SK).
From the closing gap (SS) plus the po(SS-T) value 
onwards, the closing process is ready to stop the closing 
force (SK) once it detects that the retaining hook has 
engaged.
If this is not detected, the pincer jaws close until they 
reach the closing gap (SS) minus the -(SS-T) value or 
until they reach the preset closing force (SK). Then the 
pincer jaws open with the error message F17 NOT ENGAGED.
If the Low Profile Clamp engages, the system switches immediately to the verification force, but the pincer jaws 
remain in frictional connection with the Low Profile Clamp in order to ensure a secure engagement by means of the 
verification value (VW) and the verification value tolerance (VW-T).
Immediately after the verification force holding time (VK-HZ) the system checks that the verification value (VW) is 
within the verification value tolerance (VW-T) and that the verification force (VK) is within the verification tolerance 
(VK-T).
The pincer jaws are then opened. When the pincer jaws are fully open (OF) the message OK or NO is output 
(depending on the OK/NO definition: see “System settings for the OK signal”, p. 8-55 and “System settings for the 
NO signal”, p. 8-60).
The verification value (VW) is the difference between the closing gap when the maximum closing force is applied 
and the position when the tensioning hook and tensioning tunnel are correctly engaged.

Fig. 61 

Содержание ELK 02 Series

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды