manualshive.com logo in svg

OETIKER ELK 02 Series, Инструкция по эксплуатации

Поделиться
Скачать
OETIKER ELK 02 Series Скачать руководство пользователя страница 108

OETIKER ELK 02 V2.X

10 

Maintenance and repairs

Issue 05.2021

08903352

10-108

10.2.3  Weekly preventive maintenance jobs

Pincer head

The rollers and plunger on the pincer head are subject to mechanical loading. When the ELK 02 is in regular use, 
they must be lubricated at least once a week.

Description

Type

Manufacturer

Grease

RENOLIT LX EP 2 (RENOLIT DURAPLEX EP 2) FUCHS PETROLUB AG

Friesenheimer Str. 17

68169 Mannheim, Germany

Telephone No.   +49 (621) 38 02-00

Fax 

 

+49 (621) 38 02-1 90

www.fuchs-oil.de 

Table 30 

Recommended lubricant

1. 

 Disconnect the compressed air supply and 
switch off the ELK 02 control unit.

2. 

 Using a grease gun, lubricate the pincer head 
(Fig. 74/1) at the grease nipple (Fig. 74/3) with 
RENOLIT LX-EP 2 grease (RENOLIT Duraplex 
EP 2).

3. 

 Check the pincer jaws (Fig. 74/2) for wear and 
chipping at the clamping points, and replace if 
necessary (see tools catalog for item number).

4. 

 Check the pincer and control unit for mechanical 
damage.

5. 

Replace defective parts.

Fig. 74 

Lubricating the pincer head

10.2.4  Annual preventive maintenance jobs

When the OETIKER EL (T) electronically controlled pneumatic pincer is in regular use, we recommend an annual service. 
Please contact OETIKER and return the OETIKER EL (T) electronically controlled pneumatic pincer to OETIKER.

10.2.5  Other preventive maintenance

At regular intervals, inspect the pre-filter for soiling and replace if necessary. The pre-filter must remain fitted at all 
times for trouble-free operation. 
The recommended filter (item no. 05005930) has a 5 µ screening function.
Other recommended filters or pre-filters:
• 

 FESTO, type LF-M1-G1/4-CS, item no. 182 632, and as a pre-filter in heavily contaminated air FESTO, type 
LF-M2-G1/4-ES.

• 

Corresponding holders, e.g. LFPC-M2 or LFPE-M2.

Содержание ELK 02 Series

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды