OETIKER ELK 02 Series, Инструкция по эксплуатации

Страница: 124 / 144

OETIKER ELK 02 V2.X 13 Technical data
Issue 05.2021 08903352 13-124
Data output at X3 on each completed step in step-by-step
Message text Meaning
_002 Ready for closure The ELK 02 is at the closure level and is waiting for a start from the user
OS-OK The opening gap has been reached. The ELK 02 is waiting for the hold
function to be started
F:___0 N Force value for opening gap
S:_9,99 mm Opening gap
HS-OK Holding gap and holding force have been reached. The ELK 02 is waiting for
the closure function to be started
F: 344 N Holding force
S: 10.87 mm Holding gap
V24 standard data output (only if this function is enabled)
Clamp type Pincer type Text H V 12.0 4.0 4.0 10.87 300 150 150 344 0 OK
SS/SK-OK Closing gap and closing force were reached. The ELK 02 is waiting for the
verification function to be started
F: 5035N Closing force
S: _3.76 mm Closing gap
V24 standard data output (only if this function is enabled)
Clamp type Pincer type Text S V 9.0 9.0 9.0 3.76 5000 250 250 5035 0 OK
VW-OK Verification gap and verification force have been reached. ELK 02 is waiting
for the opening function to be started
F:__84N Verification force
S:_2.34 mm Verification gap
V24 standard data output (only if this function is enabled)
Clamp type Pincer type Text V V 2.0 1.5 1.5 2.34 100 60 60 84 0 OK
OF-OK The pincer is open again, the closure has been completed.
F:___0N Force value for opening gap
S:10.99mm Opening gap
_002 Ready for closure The ELK 02 is at the closure level and is waiting for a start from the user
Table 37 Data output at X3 at each completed step in step-by-step
Message text Meaning
Error 8 Error output here: Error 8 “APN not assigned”.
Table 38 Data output at X3 on error