manualshive.com logo in svg

OETIKER ELK 02 Series, Инструкция по эксплуатации

Поделиться
Скачать
OETIKER ELK 02 Series Скачать руководство пользователя страница 91

OETIKER ELK 02 V2.X

9 

Menu navigation in the ELK 02

Issue 05.2021

08903352

9-91

Gap priority

Function

The Gap priority closure function closes the pincer jaws 
until the preset closing gap (SS) is reached. The closing 
force setting and tolerances are used to check and 
restrict the necessary closing force (SK) on reaching the 
pre-selected closing gap (SS).
At the end of the closing gap holding time (SS-HZ) the 
pincer jaws are opened.
The output OK/NO is supplied respectively when the 
pincer jaws have opened (OF) or if the opening gap (OS) 
is too small.
Advantage: Positioning to an exact closing gap with 
the predefined closing force (SK) as the closing force 
restriction.
Disadvantage: For physical and control technology 
reasons, a slow time must be chosen for the closing time 
from the open position to the closing gap (OF-SS) and 
the opening gap to the closing gap (OS-SS) 
The closing gap (SS) and the resulting closing force (SK) 
are physically interrelated.

Fig. 59 

 

Содержание ELK 02 Series

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды