OETIKER ELK 02 Series, Инструкция по эксплуатации, Страница: 55 / 144

OETIKER ELK 02 V2.X 8 Structure of the PC program
Issue 05.2021 08903352 8-55
Sequence:
The start time is the time between the initiation of the
START function and the movement of the pincer jaws.
The start time is determined by the configuration of
PC program – Options – System settings
OK signal / NO signal / LED function.
•
OK signal: one pulse on initiation of start
function
• NO signal: one pulse on initiation of start
function
• LED function: one pulse on initiation of start
function
The delay time between the initiation of the start function
and the closing movement of the pincer jaws determines
the longest pulse time for the OK or NO signal or the
LED function.
System settings for the OK signal
This menu defines the response of the OK output signal at the interfaces.
•
X2 OK
• X20 OK
Fig. 39 System settings for the OK signal
Fig. 38
START diagram