OETIKER CC 20 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 58

OETIKER CC 20 Скачать руководство пользователя страница 8

Clamp pincer CP 10 / CP 20 / CC 20

2 Basic safety instructions

Issue 06.19

08902961

2-8

•

Clamp pincer CP 10 / CP 20 / CC 20

– may be used only by persons who are familiar with its use and have been informed of the risks.

– may be used only in hand-held mode. The START button and reset button must be accessible and

operable in an emergency.

– must not be used as a stationary tool, and may not be secured in a jig fixture.

– may be opened or serviced only by the manufacturer.

– may be used only with the original equipment battery packs.

– may not be used during heavy rain, or under water.

•

If during operation the clamp pincer CP 10 / CP 20 / CC 20 poses a safety risk to people or to the machine,
release the START button and press the reset button.

•

All relevant accident prevention regulations and other generally recognized health and safety rules must be
complied with. The manufacturer shall not be held liable for damage resulting from unauthorized
modifications to the clamp pincer CP 10 / CP 20 / CC 20.

•

Suitable personal protective clothing must be worn when using the clamp pincer.

•

When working at heights, clamp pincer CP 10 / CP 20 / CC 20 must be adequately secured against being
dropped.

•

The hydraulic oil in clamp pincer CP 10 / CP 20 / CC 20

– must not be drained without taking necessary precautions.

– and must be properly disposed of.

•

The permissible ambient, storage and operating temperatures must be complied with.

Improvements to the machine

In our endeavor to continuously improve the quality of our products, we reserve the right to make improvements
without changing the instruction manual. Details of dimensions, weights, materials, performance ratings and
names may therefore be subject to necessary changes. Regarding electrical diagrams, the diagram supplied
with the machine takes precedence in all cases.

«
...
6
7
8
9
10
...
»

Содержание CC 20



























































Отзывы:

Нет отзывов