OETIKER CC 20 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 58

OETIKER CC 20 Скачать руководство пользователя страница 7

Clamp pincer CP 10 / CP 20 / CC 20

2 Basic safety instructions

Issue 06.19

08902961

2-7

2

Basic safety instructions

2.1 Using the instruction manual

•

Make sure that this instruction manual is always kept close at hand ready for use.

•

Pass this instruction manual on to the next owner or user.

•

Please read this instruction manual carefully before commissioning the clamp pincer CP 10 / CP 20 / CC 20.
Familiarize yourself with all settings and their functions. Anyone involved in setting up, commissioning,
maintaining or repairing the unit must have read and understood the instruction manual and in particular the
safety instructions.

2.2 Proper use

The unit may be used only for the intended purpose and under technically safe and fault-free conditions.

Clamp pincer CP 10 / CP 20 / CC 20 is intended for use only to close genuine OETIKER clamp models. No
other use is permissible.

Correct usage also covers observance of this instruction manual and compliance with the technical data.

Any use not in accordance with proper usage shall be regarded as incorrect usage.

Use other than for the proper purpose

The clamp pincer CP 10 / CP 20 / CC 20 is in line with state-of-the-art technology and is safe to operate.
Residual dangers remain if it used incorrectly or by untrained personnel. The manufacturer bears no
responsibility for injuries to personnel and damage to property arising from improper use of the clamp pincer CP
10 / CP 20 / CC 20. In such cases the operating company bears sole responsibility.

2.3

General safety instructions

•

If the safety instructions are disregarded there is a risk of potentially fatal injuries, damage to the health of
personnel and damage to property on the machine or surroundings.

•

Retain all operating instructions and safety instructions; they are essential for many years of fault-free
operation of clamp pincer CP 10 / CP 20 / CC 20.

•

Before using the clamp pincer CP 10 / CP 20 / CC 20, review and be aware of the hazard area. Only if no
hazards are present may the clamp pincer be activated.

•

Use only clamp pincers CP 10 / CP 20 / CC 20 which are in proper working condition. Inspect for damage
prior to each use.

•

Maintenance and repair work should be carried out only by qualified specialists.

•

Keep your working area clean and unsure it is well lit (>400 Lux). Untidy or poorly lit working areas can lead
to accidents.

•

Keep children and other people away when electrical tools are being used. Distractions can cause the user
to lose control of the clamp pincer CP 10 / CP 20 / CC 20.

•

Do not use the electrical tool in an explosion hazard area where flammable liquids, gases or dusts are
present. Electrical tools create sparks which can ignite dust or vapors.

«
...
5
6
7
8
9
...
»

Содержание CC 20



























































Отзывы:

Нет отзывов