OETIKER CC 20 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 58

OETIKER CC 20 Скачать руководство пользователя страница 20

Clamp pincer CP 10 / CP 20 / CC 20

5 Use of the clamp pincer

Issue 06.19

08902961

5-20

5

Use of the clamp pincer

5.1

Setting up the clamp pincer

5.1.1

Manually entering and managing the closure data

CAUTION

Possible damage to the clamp pincer!

Entering incorrect closure data can cause the clamp pincer to malfunction.



Always enter the correct values for the clamp pincer and pincer head. Observe the specifications and
technical data given by OETIKER.

Requirement:



Battery is charged.



The clamp pincer must be connected to the PC via the USB cable.



The clamp pincer must be switched on.

NOTE

The values for the pincer model, correlation factor
and closure force tolerance are automatically
adopted by the PC software. These values cannot be
changed manually.

1. Enter the designation of the pincer head in the

"Pincer head" file in the Closure data menu.
(max. 18 characters possible)

2. Enter the part number of the pincer head in the

"Pincer head item no." field. (max. 18 characters
possible)

3. Enter the value of the target closure force in the

"Closure force [N]" field.

If the minimum is not met or maximum closure force
is exceeded, the closure force will be automatically
restricted to the minimum/maximum value.

«
...
18
19
20
21
22
...
»

Содержание CC 20



























































Отзывы:

Нет отзывов