9
OTR 700 User's Guide Rev02 11/2016
This unit is equipped with a 4” color TFT resistive touch display. Keyboard functions are also executable on the
touch screen.
Chapter 6 OTR 700 Description
6.2 Home Screen Display
Fig 6.3
Touch Screen Tip
These icons may be selected with the touch screen function.
6.3 Power Requirements
The OTR 700 is equipped with either 4-AA NiMH Batteries or with a 2600mAh Li-ion battery.
The 4 NiMH batteries require a 100-240V-0.3A input and 9V, 0.67A center positive output universal AC/DC
battery charger. A fully charged NiMH batter pack will enable about 4 hrs. of use and require 6-8 hours to
recharge.
The Li-ion batteries require a 100-240V-0.6A input and 15V, 1.2A center positive output universal AC/DC
battery charger. A fully charged Li-ion battery pack will typically enable approximately 9 hrs. of use and require
approximately 2 hours of recharging.
The appropriate charger is supplied with each OTDR and it is clearly labeled above the charge port on the
OTDR, which charger is required. These chargers are supplied with interchangeable mains for US, Great
Britain, Europe and Australia.
Visual Fault Locator
If unit is equipment with a VFL,
selecting this icon with will cycle
through CW, Modulate and Off.
Loss Test Set
If CW source is available, Select
this icon to access the CW mode of
the light source.
Video Scope Icon
Select this icon to open the video
scope function.
Optical Time Domain Icon
Select this icon to open the
OTDR function
Firmware Version
