ODA OPM Series Скачать руководство пользователя страница 79

Страница: 79 / 80

8. Warnings

To use power supply safely, please check below :

▌Avoid cold, hot places.

▌DO NOT operated equipment after bringing from cold place

▌DO NOT operated equipment after bringing from cold place.

Liquefaction may damage the power supply.
Stand by 20~30 minutes to operate.

▌DO NOT place liquid on the equipment.

If liquid falls on the power supply, it may cause serious damage.

▌Avoid place with vibration

▌Avoid place with vibration.

▌There should be enough space around ventilation.

▌DO NOT place heavy object on the power supply.

▌Avoid place with magnetic field such as motors.

▌DO NOT input object in radiator.

▌DO NOT place hot object around power supply.

▌Front Panel should not be placed on the ground.

It may damage Knob & output terminal.

▌DO NOT connect other types of power supply with output terminal.

▌When Power supply is ON, do not connect load with output terminal.

- 76 -

Содержание OPM Series

















































































Результаты поиска

Содержание OPM Series

Отзывы:

Похожие инструкции для OPM Series

Бренды по названию

Популярные бренды

ODA OPM Series, Руководство пользователя

Результаты поиска

Содержание OPM Series

Отзывы:

Похожие инструкции для OPM Series

Бренды по названию

Популярные бренды