3-10. V/I & LMT DISPLAY
Key which select voltage or current to set-up the limit.
Also, displaying limit value of voltage/current function is included.
V/I Function
▌Power Switch ON
▌
After Power ON, check whether "P1 - OUTPUT OFF" is displayed.
▌Press OUTPUT ON/OFF Key to set-up voltage current Limit.
▌Press V/I Key once to move on to Limit Display condition, and press V/I
key to change digit to current.
▌To chenge digit to voltage, press V/I Key once more.
▌Above setting should take less than 5 seconds to active V/I function.
LMT DISPLAY Function
▌Power Switch ON
After power ON, check whether "
P1 - OUTPUT OFF
" is displayed.
▌To display voltage, current limit, press OUTPUT ON/OFF Key.
▌Press LMT DISPLAY Key.
set-up voltage and current will be displayed.
▌Wait for 5 seconds to move on to ReadBack mode, and actual
printing voltage and current will be displayed.
▌Press LMT DISPLAY ket to change condition to Limit Display Mode.
If there is no active commands for 5 seconds in Limit Display Mode, it will turn back to
previous condition.
Note
- 42 -
