OCULUS Mesotest II, Инструкция по эксплуатации

Страница: 66 / 92

12 Patient Data Management
60 / 86 Instruction Manual Mesotest II (G/62800/0715/en)
12.5.2 "Devices" tab
"Database" box
Different users can be set up for different databases.

In the drop-down list for selecting a database (1), choose the entry
(User) that you would like to edit.

Choose the corresponding path for the database, data, and images
using the individual buttons for folder selection (3).
Normally, two different folders are created for data and images dur-
ing installation, as shown here (7).

For data: Name of the device plus the .DAT identifier

For images: Name of the device plus the .BMP identifier

For each user, enable whether the associated database should be
enabled or not (8).
If more than one database is enabled, an additional drop-down list
appears on the main page of the Patient Data Management user
interface. You can enable a user (or the assigned database) in this list. The
patient list and the associated examinations are updated when the active
user is changed.

You can also select the "load while starting" option (2) for exactly
one user. The associated database is loaded by default when the
Patient Data Management user interface is started, and is selected
accordingly.
1 Drop-down list for selecting a database 6 Path for the currently selected device
2 "Load while starting" radio button 7 Checkbox for activating a device
3 Folder selection 8 Path for the database
4 Drop-down list for selecting a device 9 Checkbox for activating a database
Fig. 12-8: "Devices" tab
1
2
3
4
5
6
7
8