OCULUS Mesotest II, Инструкция по эксплуатации

Страница: 13 / 92

4 Safety Instructions
Instruction Manual Mesotest II (G/62800/0715/en) 7 / 86
Instructions for operation

Never put a damaged Mesotest II into operation.

Only operate the Mesotest II using original accessory parts supplied
by us, and when the device is in technically perfect working order.

Before initial operation: Let OCULUS or an authorized dealer train
you in the operation of the Mesotest II.

Only operate the equipment after you have read and understood the
Instruction Manual.

Do not touch the patient and the device at the same time.

Make sure that the device cannot tip over by leaning against it or
sitting on it.

Do not cover the ventilation openings.
Instructions for maintenance
To ensure satisfactory and reliable operation, we recommend that you
have the Mesotest II checked every two years by our service department
or an authorized dealer. If an error occurs which you are unable to correct,
label the Mesotest II as “out of order” and contact our service department
or an authorized dealer.
Instructions for disassembly and disposal

When disconnecting electrical connections, pull on the respective
plug instead of the cable itself.

Dispose of the equipment in compliance with the corresponding
legal requirements.
Note on electrical safety
Attention
Risk of personal injury or damage to property due to an incorrect level of
safety
Connecting the Mesotest II with non-medical electrical equipment (for
example data processing equipment) to a medical electrical system must
not result in a patient safety level below that prescribed by DIN EN ISO
60601-1. If making this connection leads to the leakage current threshold
being exceeded, protective measures including a circuit breaker must be
in place.

Ensure that connections with non-medical devices are made
correctly.

Use only a computer that meets the specifications given in this
instruction manual,
sec. 19, page 80 .