Octopus RS, Руководство по установке

Страница: 14 / 24

OCTOPUS – Type RS Sailboat Drive
OC15276VL REV B.doc Subject to change without notice 14
C. INSTALLATION
C1. Installation of Drive Unit - Steering Cable & Spent Cable Tube
Step 1 - Install Drive Unit
i. Remove 2 x lock bolts, nuts and washers from ports and retain.
ii.
Position drive unit in final location. Verify position by simulating the
steering cable connection whilst steering cable is NOT connected.
iii.
Transfer bolt pattern from the drive base plate (4 x 7 mm diameter
holes) into mounting structure.
iv.
Remove drive unit and prepare holes in mounting structure to receive
mounting fasteners. Note that this connection does NOT transmit any
steering loads.
v.
Re-position drive unit and install fasteners, tighten and torque.