Octopus RS, Руководство по установке

Страница: 12 / 24

OCTOPUS – Type RS Sailboat Drive
OC15276VL REV B.doc Subject to change without notice 12
B3. STEP 3 – Determine Routing Path for Steering Cable
1. After establishing locations for Connection Kit & Drive Unit. Routing for
Steering Cable must be determined.
2. The cable routing should take into consideration the extreme movements
of the steering mechanism during HO to HO steering. Maximize the bend
radius and minimize the total number of bends. It is recommended that
bends are no smaller than the minimum bend radius (6”) and that the total
angle of all bends combined be no larger than 270 degrees. See detailed
graphic showing preferred routing and bend definition.
3. Steering Cable length supplied with standard system is 6 feet (2 metres).
Other lengths are available.
‘A’
Dimension
Mid
Stroke
‘B’
Dimension
Preferred Cable Routing
150 mm Min
Radius