LEARN MODE
Place the original source remote (CD,
DVD etc) facing the LRC300, head to
head, about 2-3 inches (5-8 cm) apart.
Note: When the remote is scanning for a code to be learnt it is not
possible to exit Learn mode or select a different storage button. Wait
8 seconds until the remote times out and "LEARN" begins flashing again.
On the original remote, press and
hold
the button whose IR code you
want to teach into the LRC300.
Hold
the button until the LRC300
display reads "OK!".
When "OK!" appears, learning is
complete and "LEARN" flashes again.
Repeat steps 3-4 to learn another
button. If no storage button is pressed
after 8 seconds, the remote will
automatically select the next storage
button for you.
"LEARN" appears flashing on the
display. Press the desired
storage
button (e.g. button 1). "LEARN" will
stay static on the display.
Press a
device
button (e.g. TUNER)
to select the device bank into which
you wish to teach codes.
7
Note: Learning a new code will always overwrite the current data
in a storage button including a Macro if one has been previously
programmed.
HEAD TO HEAD
ABOUT 2"- 3"
ORIGINAL REMOTE
LRC300
1. On the back of the remote press the LEARN button
once
to enter Learn mode (using a paperclip or similar).
Display shows "LEARN" flashing.
1
2
3
4
5
6
CCTV
HEAD TO HEAD ABOUT 2"- 3"
ORIGINAL REMOTE
LRC300
INPUT 4
INPUT 5
INPUT 6
LOCAL 1
LOCAL 2
CD
DVD
TUNER
LRC300
Continued on Page 8.
2.
3.
4.
