9
A-BUS READY™ AND LEARNING CODES INTO
DEVICE BUTTONS cont.
1. On the back of the remote press the LEARN button
once
to enter Learn mode (using a paperclip or similar).
Display shows "LEARN" flashing.
Note: Learning new codes into the source/device buttons replaces
the Octopus codes that have been pre-coded into them.
To recover the original codes, perform a Clear Key or Clear
Device on each device button in turn. This will reset its code to
the dedicated Octopus source codes. Alternatively a Clear All
operation will reset the whole remote to its default factory
settings including all pre-codes. See the CLEARING
STORED DATA section for more information.
INPUT 4
INPUT 5
INPUT 6
LOCAL 1
LOCAL 2
CD
DVD
TUNER
Press and
hold for 5 seconds
the
device
button (e.g. TUNER)
into which you want to teach
the new code (and replace the
pre-code). "LEARN" will stay
static on the display.
Press the appropriate
source/device button on
the AV Receiver remote,
and hold until the
display reads "OK!".
When "OK!" appears learning is
complete and "LEARN" flashes
again. Repeat steps 2-3 to learn
the other source/device buttons.
HEAD TO HEAD ABOUT 2"- 3"
LRC300
A-BUS READY RECEIVER REMOTE
TUNER
3.
2.
4.
