2
SUPPORT.OCTANEFITNESS.COM
SERVICE TRAINING
Periodic cleaning and inspection contributes to optimum machine performance and customer
enjoyment. Octane Fitness recommends that you perform the following routine maintenance for
every 100 machine hours of use:
Inspection Points
• Check
Electrical
Connections - Cables, Wires, and Battery
Stride motors
Switches
• Check
Mechanical
Pedal Bolts and Pillow Block Set Screws
Drive Belt
Moving Arm, Lateral, and Parallel Link Bolts
• Check
Adjustments
Levelers
Handlebars
• Run
Diagnostics
Detailed maintenance and diagnostics procedures are listed in this manual and can be found on
the Octane Fitness Support Site:
http://support.octanefi tness.com
.
Product specifi c manuals can also be found on the support site. Refer to the following
documentation for more information:
• LX8000 Assembly Instructions and Operations Manual
• LX8000 Service Guide
• PRO Series LCD Mounting Arm Kit Assembly Instructions
Tools Needed
Routine
Maintenance
# 2 Phillips
screwdriver
10mm / 6mm / 4mm
hex keys
17mm wrench
13mm wrench
10mm
socket wrench
19mm wrench
Please Read – Before You Begin
OR
Enter
Level
tart
Program
Workout
Enter
To check MACHINE
HOURS: press and
hold the Program
Workout up arrow
(
) and Level up
arrow (
) for three
seconds.
IMPORTANT
Before working on any Octane Fitness product, please take the time to look through the product
specifi c manuals. Also note the following safety directions:
• Always unplug the machine while servicing (if applicable).
• Be extremely careful when working inside of Octane machines as there are many moving parts.
WARNING!
LINKAGES PRESENT NUMEROUS PINCH POINTS.
USE CAUTION TO AVOID INJURY.
• Never spray cleaning solutions directly on the machine. To remove excess sweat, oil, and dirt:
spray cleaning solution on a towel or rag fi rst, and then wipe down the machine.