Octagon XE-900, Справочное руководство

Страница: 24 / 122

24
Mounting the XE
–900
WARNING!
The XE–900 contains static-sensitive CMOS components. To avoid
damaging your card and its components:

Ground yourself before handling the card and observe proper ESD
precautions

Disconnect power before removing or inserting a PC/104 or PC/104 -
Plus expansion board
Equipment required
To install the XE–900 SBC you will need the following equipment (or equivalent):

XE–900 SBC

+5V power supply – see the XE – 900 SBC power supply requirements section.
You might also need an ATX power cable, part #6537.

A device with an operating system. The device could be a CompactFlash, hard
disk, or CD ROM. The operating system can be Windows NT, Windows CE.net,
Linux, QNX, or DOS.

PS/2 style keyboard

VGA monitor

2 mm VGA-12 Cable, part #6392

VTC-20F Cable, part #4866 (for serial console)

Null modem adapter, #2740 (for serial console)

Windows HyperTerminal or equivalent terminal emulation software (for serial
console)

Your PC (for serial console)
Hardware components required to mount the XE–900 SBC (included):

9 threaded hex standoffs (4–40 x 3/4”)

9 screws (4–40 x 3/16”)

9 internal star lock washers (#4)

9 nuts (4–40)
Refer to the XE–900 SBC component diagram, figure 2–1 on page 19, for the
location of various connectors, and to the mounting hole diagram, figure 2–3 on
page 21, for mounting the XE–900 SBC system.
With the Integrated Conductive Cooling System use 4 #10-32 screws (not included).
See page 91.