9
OceanLED INSTALL / DMX Controller / 073114 / v4.2
3.3 The Infra Red (IR) Remote Control
1.
To use the official STICK remote
control, open the tools application
which can be found in the software
directory. Select the Infra Red tab and
send the default configuration to the
STICK. Check that Infra Red is enabled
in the parameters tab.
2.
If you are not using the official remote,
the STICK can be triggered by any
36Khz remote control. Simply hold
down the "Select" button and press
the end of the color fader to tell the
STICK that we want to program an IR
signal.
3.
The STICK will flash through each
scene, when you see the scene you
wish to trigger, hold down the button
on the IR device you wish to use as a
trigger.
For example, to program Scene 4 to be
triggered by button 4 on a remote control,
hold down the "Select" button and the color
fader. Wait for scene 4 to light up, then press
button 4 on the remote control.
