6
6
2
CHAPTER
TWO
OceanLED INSTALL / DMX Controller / 073114 / v4.2
Chapter 2: Installing the DMX Touch Panel Controller
2.1 Connect the wires
1.
Connect the DMX output pigtail cable to the green connector (LEDs, Dimmers, Fixtures..)
(Brown+Brown/White=ground, Orange=DMX-, Orange/White=DMX+)
2.
POWER: Connect the AC/DC adapter. (Black/White Stripe=Positive, Black=Ground)
2.2 Mount the interface in a dry location
3.
Plug the green connector block into the rear of the DMX Touch Panel Controller.
4.
Mount the back plate of the interface on the preferred mounting location. (in a dry place) 86mm
X 86mm X 10mm
5.
Close the unit by clipping the front panel onto the back
plate.
