13
13
5
CHAPTER
FIVE
OceanLED INSTALL / DMX Controller / 073114 / v4.2
Chapter 5: Operation
5.1 - DMX Touch Panel Controller
1.
Power on the unit by touching the top centre button.
2.
Select the required scene by touching the left / right
arrows . The blue led displays the selected scene.
5.2 - Pre-programmed scenes are as follows
Scene
Function
1
Red
2
Green
3
Blue
4
Super White
5
Colour Cycle
5.3 DMX Wifi Touch Panel Controller
1.
Power on the unit by touching the top centre
button.
2.
Select the required scene by first touching the
left / right arrows under the “ABCD” display to
select the ‘Area page’ if required, then touch the
required scene button. The blue led displays the
selected scene.
3.
Brightness / Speed / and colour of the selected
scene can be changed via the select button in
the bottom right.
4.
For pre-programmed scenes refer to page 10
Power On/Off
Scene Selection
Scene Selection
Power On/Off
Select Button
