50
SET TMT 1
information includes (Fig. 42):
> Graphics TMT1 and ON (or OFF) flashing.
> Set Point (Transmitter's Serial Number (Link Code).
• Pressing and releasing the S button momentarily (< 2
seconds) will toggle between ON and OFF.
• Pressing and releasing the A button momentarily (< 2
seconds) will accept the ON/OFF selection.
• If OFF is selected, SET TMT 2-3 USE , SET TMT 2 (or BUD
1), and TMT 3 (or BUD 2) will be bypassed and operation
will revert to the SET U screen.
• If ON is selected, the first (left) digit of the Code will flash.
• Pressing and releasing the S button repeatedly (< 2 seconds
each) will increase the First Digit from 0 to 9 in increments
of 1.
• Depressing the S button will scroll through the Set Points at
a rate of 4 per second.
• Pressing and releasing the A button (< 2 seconds) will
accept the First Digit of the Code and/or advance to the
Second Digit which will be flashing.
• Pressing and releasing the S button will increase the Second
Digit from 0 to 9 in increments of 1.
• Depressing the S button will scroll through the Set Points at
a rate of 4 per second.
Fig. 42 - Set TMT 1
TMT is the abbrevia-
tion for Transmitter.
