manualshive.com logo in svg

Oceanic VT 3, Руководство по эксплуатации

Поделиться
Скачать
Oceanic VT 3 Скачать руководство пользователя страница 125

125

>  If the CD Timer is OFF, the CD Time (min:sec) previously set will be displayed with the

colon solid.

•  Pressing and releasing the S button momentarily (< 2 seconds) will toggle between

ON and OFF.

>  If a Time has been set, a toggle from OFF to ON will start the CD Timer indicated by

the colon flashing.

•  Press the S button to activate the SmartGlo Backlight.
•  Pressing/releasing the A button momentarily (< 2 seconds) will revert the Display to

the FREE SURF MAIN screen.

•  Depressing the A and S buttons simultaneously for 2 seconds while viewing the CD

Timer Status screen when the CD Timer is OFF will access the SET CD TIMER screen
with the MINUTE Set Point flashing.

NOTES:  Once the CD TIMER has been Set and Started (by selecting
ON), it will continue to run in the background while on the surface
until turned OFF (stopped) or the Time reaches 0:00 at which time the
Alarm will strike (3 short beeps 3 times), the message TIMR will be
displayed, and the CD TIMER will revert to OFF.

Upon descending to 5 FT/1.5 M for 5 seconds (i.e., entry into FREE
DIVE Mode), CD TIMER operation will continue, if in progress.

During a dive, the CD TIMER can be turned OFF (stopped) and ON
(started), but not Set.

Содержание VT 3





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды