144
Transmitter Battery Removal
Locate the Battery Hatch on the End of the Housing:
• Apply a coin to the recessed slot of the Hatch and turn it
counter clockwise out of the Housing (Fig. 128).
• Remove the Battery from the Battery Compartment and
discard according to local regulations governing disposal
of Lithium batteries.
VT3 and Transmitter Inspection
• Closely check all of the sealing surfaces for any signs of
damage that might impair proper sealing.
• Inspect the Buttons, Lens, and Housing(s) to ensure they are
not cracked or damaged.
WARNING: If damage or corrosion is found,
return your VT3 system to an Authorized Oce-
anic Dealer, and DO NOT attempt to use it until
it has received factory prescribed service.
• Remove the Battery Hatch O-ring(s) and inspect them for
any signs of deterioration or deformity. DO NOT use tools
to remove the O-ring(s).
• To ensure proper sealing, O-ring replacement is highly
recommended each time a Battery is replaced.
• Closely examine all threads for any signs of damage that
might prevent proper threading.
Fig. 128 - TMT BATTERY
HATCH REMOVAL
