140
CARE AND CLEANING
Protect your VT3 from shock, excessive temperatures, exposure
to chemicals, and tampering. Protect the lens against scratches
with a Instrument Lens Protector. Small scratches will naturally
disappear underwater.
• Soak and rinse the VT3 in fresh water at the end of each
day of diving, and check to ensure that the areas around
the Low Pressure (Depth) Sensor (Fig. 124a), PC Interface
Data Port (Fig. 124b), and Buttons are free of debris or
obstructions. Soak and rinse the Regulator(s) with the
Transmitter(s) attached.
• To dissolve salt crystals, use lukewarm water or a slightly
acidic bath (50% white vinegar/50% fresh water). After
removal from the bath, place the VT3 and the Regulator(s)
with Transmitter(s) unit under gently running water and
towel dry before storing.
• Transport your VT3 system cool, dry, and protected.
INSPECTIONS AND SERVICE
Your VT3 should be inspected annually
by an Authorized
Oceanic Dealer who will perform a factory prescribed function
check and inspection for damage or wear. To keep the 2 year
limited warranty in effect, this inspection must be completed
one year after purchase (+/- 30 days).
Fig. 124 - VT3 CASE BACK
b
a
