background image

Sauna & Steam

Oceanic Saunas  01902 450 550  [email protected]

3

Steam Generator Manual

1.  Introduction

Thank you for choosing to buy our Oceanic steam generator, please take the time to read these 

instructions before you begin as they contain important information about the installation and 

maintenance requirements.

“Oceanic” heavy duty steam generators are available in specifications from 6kw to 12kw and are 

equipped with a programmable thermostatic controller. The controller is set with the time and 

day and allows you to program the generator to turn on and off automatically when you require, 

the generator can also bet set to clean itself automatically. Once these settings have been saved 

the machine can be left to work on it’s own. The machine still must be checked on a regular basis 

for safety.  

It is also possible to have the generator working off a push button which you place outside of the 

steam room, when customers push the button it illuminates and they get 30 minutes of steam.  

The machine can also just work on a count down timer for say the next 90 minutes. 

Our display tells you everything that the generator is doing, if it takes in water, heats, reached 

temperature, draining, descaling, light on, fan on, timer set.  

You can also Lock the keys so other users can’t play with the settings.  light of the steam room, the 

automatic drain valve, key-lock, alter the temperature display between Centigrade and Fahrenheit; 

as well as displaying the steam generator‘s status by the 8 LED’s on the panel, heating, water inlet, 

temperature, drain status etc. note also that one “OC-D” controller can control multiple “Oceanic” 

steam generators.

Every “Oceanic” steam generator is thoroughly tested before leaving the factory so there may be 

the remains of water inside the boiler.

2.  Important Notes

•  Read the manual before installation and operation.

•  This Equipment must be installed by competent person. 

•  This equipment must be connected to an all pole isolator

•  Disconnect the power supply before exposing electrical connections.

•  Confirm the correct voltage to your steam generator 1 or 3 phase.

•  For hard water areas please use a water softener. 

•  Water supply must have maximum of 1 bar pressure, we recommend the use of a pressure 

reducing valve if necessary

3.  Safety Precautions 

•  Elderly persons, pregnant women, or these suffering heart disease, high blood pressure, 

diabetes or not in good health are advised to seek medical opinion before using a steam room.

•  Do not smoke in the steam room.

•  Avoid using the steam room immediately after strenuous exercise. 

•  Do not use the steam room when under the influence of alcohol.

•  Leave the steam room at once if you feel sleepy, sick or uncomfortable.

•  Ensure there is good ventilation for the steam room.

•  We do not recommend that children under 16 use this product.

•  Commercial operators should post a notice of these precautions in a prominent position.

Steam entering the steam room will be scalding hot; take care to position the inlet nozzle 

away from where users will sit and/or provide adequate guarding, post a notice to caution 

users.

Содержание OCD-60























Отзывы: