Sauna & Steam
Oceanic Saunas 01902 450 550 [email protected]
16
Infrared Sauna Assembly
11. Fix the bench end rails.
i. Fix the 69 x 19mm bench support rail so the top is at 481mm from the floor. Use 4 x 50mm
screws.
ii. Fit the two support legs using a brad nailer as shown, this can alternatively be done using a
countersink and 30mm screws.
12. Fix the bench
i. Pre dill with countersink, then fix 2 x 50mm screws through the under frame of the each end
of the bench as shown. The bench is sat forwards as shown so there is a gap at the back of the
bench, this will be covered by the heater guard later.
