Sauna & Steam
Oceanic Saunas 01902 450 550 [email protected]
5
Infrared Sauna Assembly
5. Fix Corner Panels
i. Find the floor plan in the parts list for the cabin you are building, this will indicate where each
panel needs to go.
i. Start by fixing the corners together, pre drill 4 holes using a 4mm counter sink & drill.
ii. Fix using the 80mm screws provided
6. Add Door -
Important: Wear goggles and gloves at all times whilst handling the door.
i. The door is the same size as the full sizes panels so it can be moved around in most cabins. We will show
the different ways to join the door with the panels in the following points.
ii. If you are working alone we advise that you remove the glass from the hinges and set to one side.
iii. To install the door as shown in the 2D image below (on the corner against the end of the side panel).
Firstly with 30mm screws evenly fix the 4 flat brackets down to the inside edge (30mm side) of the
door frame (hinge or handle side just rotate the frame 180
o
). Then fix to the end of the side panel using
30mm screws. (see page 19 for trimming edge of panel and magnetic catch info)
