Sauna & Steam
Oceanic Saunas 01902 450 550 [email protected]
10
Infrared Sauna Assembly
8.4. Lighting
i. Assemble the spot light(s) as shown and fit into the ceiling hole(s).
ii. Install either standard or colour changing bulb(s) if supplied
iii. If you ordered the deluxe specification you will be supplied with a remote control to control the
lights, you can choose between many different colours, there is also a fade mode.
iii. Secure at the bottom with 1 x 30mm
screw.
iv. Finally Plug the pre wired light cable into the socket on the control box labelled “Light”
Note: It is possible to switch a second lighting circuit separately using the chromo input. This would
be useful if you wanted the option of both white and coloured lighting. Oceanic provides one pre
wired cable as standard.
