64
SET WET ACTIVATION ON/OFF
Information includes (Fig. 61):
> Graphic WET
> Set Point graphic ON (or OFF) flashing.
• Pressing and releasing the S button will toggle between ON
and OFF.
• Pressing and releasing the A button momentarily (< 2 sec-
onds) will save the setting and/or advance to the SET UNITS
screen with the Set Point flashing.
• Pressing and releasing the A button momentarily and repeat-
edly (< 2 seconds each time) will step through the other SET U
screens.
• Depressing the A and S buttons simultaneously for 2 seconds
will save the setting and revert back to the SET U screen.
• Depressing and holding the M button for 2 seconds will revert
to the Surface Mode screen.
• If no button is pressed during a period of 2 minutes, the unit
will revert to the Surface Mode screen.
Fig. 61 - Set Wet Activation
Refer to page 44 for
a description of the
Wet Activation
feature.