18
To check the condition of the ATOM or a Transmitter's Battery,
depress the S button for 2 seconds while in Dive Computer
Surface Mode then release it.
• As the button is depressed, the ATOM's Receiver will acti-
vate.
• 2 seconds later, the ATOM (Watch)'s Battery status will be
displayed for 3 seconds (Fig. 5), then -
• if active and linked, Transmitter 1's Battery status will be
displayed for 3 seconds, then -
• if active and linked, Transmitter 2's Battery status will be
displayed for 3 seconds (Fig. 6A), then -
• if active and linked, Transmitter 3's Battery status will be
displayed for 3 seconds, then -
• the display will then revert to Surface Mode.
• If a Transmitter is not active and linked, the message
NotAvAil (not available) will be displayed (Fig. 6B).
Tank Pressure (described later) will also appear on the active
Transmitters Battery Status displays.
Fig. 5 - Battery Status (Good)
Fig. 6B - Transmitter 3 Status
(Not Available)
Fig. 6A - Transmitter 2 Battery
Status (Low)
