manualshive.com logo in svg

Oceanic ATOM, Руководство по эксплуатации, Страница: 117 / 152

Поделиться
Скачать
Oceanic ATOM Скачать руководство пользователя страница 117

117

NOTE:  If a switch to a new Gas Mix would
expose the diver to a prohibitive PO2 level of
1.60 ATA or greater, the Audible Alarm will
sound, the red LED will flash as a warning, and
the message DONT > SWCH will scroll at the top
of the display (Fig. 107) until acknowledged by
pressing and releasing the S button momentarily
(< 2 seconds).

Due to the possibility that sufficient air may not be available in
the Switch From tank to complete the dive, the Switch to the prohibitive Mix can still be
made.  If the Switch is made to the prohibitive Mix while in No Deco Dive Mode, the High
PO2 Alarm will activate.   If the Switch is made to the prohibitive Mix while in Deco Dive
Mode, the message HIGH > PO2 will replace the DECO message.

Switching of Gas Mixes can only to be performed during the time that a Gas Switch Pre-
view Display is being viewed.  These are accessed from the Main Dive Display.

•  Pressing and releasing the M button momentarily (< 2 seconds) while viewing a Main

Display while in Dive modes will access the GAS 1 Switch Preview Display.

•  The ATOM will revert to the Main Display after 10 seconds of no M button action.

NOTE:  When Switching to a Gas (FO2) associated with a Tank that
does not have an active Transmitter, the graphic ANALOG will be
displayed.  The procedures and displays will be the same without the
Transmitter link icon.

Fig. 107 - Don't Switch Alert

Содержание ATOM

























































































































































Отзывы:

Нет отзывов