background image

14/11/2022 

912S-03718 v01.00 

15

PLB3 USER MANUAL

4. 

BEACON REGISTRATION

!

 

It is the owner’s responsibility to register this beacon with the appropriate National 

Authority before operation.

The preferred method of registration is online. Documentation is provided within the packaging with 

information regarding registration with the relevant body to comply with the configuration of the 

beacon.

4.1 

Advice to owners of Personal Locator Beacons (PLBs).

Registration of 406 MHz satellite PLBs:

• 

Registration with the National Authority is 

mandatory

 due to the global alerting system.

• 

The information provided in the registration card is used for rescue purposes only.

• 

See below for details on how to register your beacon upon completion of the sales transac-

tion. Before a beacon enters service, it 

must

 be registered with the National Authority. 

• 

If the beacon is being transferred to a new owner, the current owner needs to inform the 

National Authority of the name and address of the new owner.

• 

The subsequent owner of the beacon is required to provide the National Authority with the 

information as shown in the owner registration card.

• 

This obligation transfers to all subsequent owners.

• 

Some National Authorities require periodic renewal. It is the owner’s responsibility to 

ensure registration details are current and valid.

4.2 

Country Specific Registration information

USA 

 

NOAA-Sarsat, USMCC, NSOF, E/SPO53, 1315 East West Hwy, Silver Spring, MD, 20910 

 

Fax: (1.301) 8174565, Tel: (1.301) 8174515 (1.888) 2127283 

 Email: 

[email protected]

, Web: 

www.beaconregistration.noaa.gov/

CANADA 

 

Beacon Registry, CMCC Trenton, 8 Wing Trenton, Box 1000 Stn Forces, Astra, Ontario, K0K 3W0 

 

Fax: +1 877 406 3298, Tel: +1 800 211 8107 / +1 613 965 7265 

 Email: 

[email protected]

, Web: 

www.cbr-rcb.ca

UK 

 

Distress & Security Beacon Registry, Pendennis Point, Castle Drive, Falmouth, TR11 4WZ 

 

Fax: +44 (0) 13 2631 9264, Tel: +44 (0) 20 3817 2006 

 Email: 

[email protected]

, Web: 

www.gov.uk/406beacon

AUSTRALIA 

 

Australian Maritime Safety Authority, GPO Box 2181, Canberra, Australia, ACT 2601 

 

Fax: 1800 406 329 (+61 2 9332 6323 (Int.)), Tel: 1800 406 406 (+61 2 6279 5766 (Int.) 

 Email: 

[email protected]

, Web: 

www.amsa.gov.au/beacons

NEW ZEALAND 

 

JRCC NZ, Avalon Studios, Percy Cameron Street, P.O. Box 30050, Lower Hutt, 5040 

 

Fax: +64 4 577 8041, Tel: +64 4 577 8030  +64 4 577 8034 

 Email: 

[email protected]

, Web: 

www.beacons.org.nz

For other countries visit: 

www.406registration.com/countriessupported.aspx

Содержание rescueME PLB3





























Отзывы: