11
3
line lengths using your pigtails. See the Pigtail Guide on the following
pages.
If the springs are not equally compressed when fully powered, the trimline
has stretched and must be adjusted at the winder. To fix this:
�
Measure the difference between the two spring lengths when fully
powered. Divide this number by 2. This is the length of line that must be
shifted from one side of the winder to the other.
�
Completely depower the bar by unwinding the Sidewinder to the
minimum power setting.
�
Using a small flathead screwdriver, loosen the knot attaching the line to
the winder assembly.
�
Once you have developed slack in the trimline-winder knot, slide the
appropriate length of line through the winder assembly that was calculated
in Step 1. (3)
�
Adjust the Sidewinder to full power to verify that the force tensioner
springs are now compressed the same amount. Repeat from Step 1 if
necessary.