17
THE R3 FORCE TENSIONER SYSTEM
The tensioning system allows the user to depower their kite when there is
no tension on the back lines. To keep the tensioning system free from sand
and debris, rinse it regularly. This can be achieved by simply dunking the
bar in the water as you start your session. Storing the bar with the tension-
ing system fully depowered will increase the life of the springs and prepare
you for your next launch.
To increase the life of your lines and bar floats, flush the floats out with
fresh water regularly. Make sure the winder is set to minimum power,
remove the spring cap from the top of the bar float and flush the float from
the base with fresh water so that it flows out the top of the float.
Be sure to
r
eplace the spring cap into the top of the bar float.
